Abstract: Electrochemical biosensors have been of increasing interest, especially those developed to be directly applied in diagnostic areas, such as neuroscience. We have been interested in developing a range of biosensors for monitoring glucose, lactate, pyruvate, and glutamate in order to study on-line both brain function in the laboratory and to monitor brain health in neurointensive care. For a biosensor to function effectively in these situations, it has to combine the following characteristics: quick response and high sensitivity, good reproducibility and adequate stability. In this study we compared the performance of a number of different amperometric biosensors strategies. These included ferrocene mediation of immobilized enzymes (system A), a redox hydrogel based system (system B), and a conducting polymer approach using polyaniline (system C). All assays were operated as flow injection systems with upstream immobilized enzyme beds if necessary. When calibrated for H2O2 systems A and B reacted quickly enough to give quantitative conversion up to 0.2 mM. Above this concentration the response was limited by horseradish peroxidase enzyme kinetics and eventually enzyme loading. System C showed a restricted H2O2 response. When calibrated for glucose (by use of immobilized glucose oxidase) system B exhibited the highest sensitivity but its analytical range was restricted because the system became limited by H2O2 response. System A had low sensitivity for analyte compared to H2O2 and system B, but a greater useful range. Problems of mediator cycling between the immobilized enzymes are discussed. System C gave an excellent linear range but sensitivity was limited by background noise. Stability and reproducibility of the systems are also described. In conclusion, from this study the ferrocene system proved to be overall most useful and has now been used in the first dual on-line monitoring of glucose and lactate in patients in neurointensive care.

Abstract: The adsorption of the proteins, bovine serum albumin, fibrinogen, avidin and neutravidin (non-glycosylated form of avidin) to a variety of surfaces imposed on thickness shear mode sensors in examined in a flow injection analysis format. In all cases, adsorption of these moieties was essentially irreversible, although the magnitude of adsorption was dependent on surface free energy and functional group chemistry. Also described is the direct, real-time detection of the binding of peptides to HIV-1 TAR RNA bound on a thickness-shear mode (TSM) sensor surface. The results clearly indicate that responses are discriminatory for two different peptides. In order to provide a theoretical backcloth for the experimental measurements, a new model for the operation of the TSM in liquids is presented.