University of North Florida
Browse the Citations
-OR-

Contact Info

Stuart Chalk, Ph.D.
Department of Chemistry
University of North Florida
Phone: 1-904-620-1938
Fax: 1-904-620-3535
Email: schalk@unf.edu
Website: @unf

View Stuart Chalk's profile on LinkedIn

Bromofenoxim

  • IUPAC Name: 2,6-dibromo-4-[[(2,4-dinitrophenoxy)amino]methylidene]cyclohexa-2,5-dien-1-one
  • Molecular Formula: C13H7Br2N3O6
  • CAS Registry Number: 13181-17-4
  • InChI: InChI=1S/C13H7Br2N3O6/c14-9-3-7(4-10(15)13(9)19)6-16-24-12-2-1-8(17(20)21)5-11(12)18(22)23/h1-6,16H
  • InChI Key: VTQWKUZUPOTXEH-UHFFFAOYSA-N

@ ChemSpider@ NIST@ PubChem

Citations 1

"Batch Square-wave Voltammetric And Flow Injection Amperometric Determination Of Trace Amounts Of Bromofenoxim"
Anal. Chim. Acta 1995 Volume 310, Issue 1 Pages 153-160
Xiaohua Cai, Bozidar Ogorevc*, Emilio Benfenati, Kurt Kalcher, Milko Novic and Irena Grabec

Abstract: Voltammetric measurements were performed using a static Hg drop electrode, a Ag/AgCl/KCl (saturated) reference electrode and Pt-wire counter electrode. Cyclic voltammograms of bromofenoxim (I) in Britton-Robinson (BR) buffer of pH 7 were obtained at 200 mV/s. Two well defined reductive peaks were observed at -0.38 and -0.54 V. The peak at -0.38 V was used for subsequent measurements of I. For analysis by square-wave voltammetry, the calibration graph was linear for 0.0011-1.3 µM-I and the detection limit was 0.1 µg/l. The in situ formation and dynamic properties of Hg film-coated glassy C electrodes for the determination of I by FIA were investigated; 0.5 M KNO3/20 mM BR buffer of pH 7 was used as carrier and amperometric detection was at -0.7 V vs. Ag/AgCl. The response was linear for 0.11-9 µM-I with a detection limit of 10 µg/l. The RSD (n = 25) was 3.2%.
Amperometry Electrode Voltammetry Method comparison Buffer